Search results
Results From The WOW.Com Content Network
The water pipe itself, a single-piece construct consisting of the bowl-stem, the water container, and a drawtube at least 3 inches, but some can be up to 12 inches in length. Some are straight with a "Joint" (Sandblasted top part of stem, usually about 1 inch long, and all the way around, tapered or cone shaped, so the tapered, or "cone shaped ...
The advantages of this method are durability, speed, neatness, and safety. The connection can be made even when the tubing is wet. Crimped fittings are suitable for drinking water pipes and other hot-and-cold systems (including central heating). They are more expensive than sweated fittings.
The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. [1] For example, when a 1" pipe transitions into a 3/4" pipe and the top or bottom of the pipe doesn't need to remain level. [2] This pipe reducer may be used when there is a single diameter change or multiple diameter changes. [1]
The most common is a tool design with a die and a cone, which is screwed through the handle until the edges are separated at the required angle. [11] [12] [13] A relatively new compact design is the reamer, used as an attachment to a drill. In this case, by friction, the pipe material is heated and gradually flattened to the shape of the nozzle ...
The simplest apparatus is a tubular setup known as a Venturi tube or simply a Venturi (plural: "Venturis" or occasionally "Venturies"). Fluid flows through a length of pipe of varying diameter. To avoid undue aerodynamic drag, a Venturi tube typically has an entry cone of 30 degrees and an exit cone of 5 degrees. [1]
They likely date back over 3,000 years, officials said.
A nozzle is a device designed to control the direction or characteristics of a fluid flow (specially to increase velocity) as it exits (or enters) an enclosed chamber or pipe. A nozzle is often a pipe or tube of varying cross sectional area, and it can be used to direct or modify the flow of a fluid (liquid or gas). Nozzles are frequently used ...
In the UK this type of tap normally has a wheel-shaped handle rather than a crutch or capstan handle. Cone valves or ball valves are another alternative. These are commonly found as the service shut-off valves in more-expensive water systems and usually found in gas taps (and, incidentally, the cask beer taps referred to above).