DIY Projects

How to Build Window Cornices

Want to give a dreary room a dramatic facelift? Adding window or door cornices will bring freshness and style to any room décor. They’ll hide ugly drapery rods and add a touch of custom-made detailing that makes an ordinary window or patio door look like something special. The top of the cornice can even serve as a display shelf for art or collectibles.
 
View the slideshow above for tips for adding a cornice to your room.

Cornices are surprisingly easy to build, even the elegant ones you see in home magazines. Using off-the-shelf trim from the home center and a compound miter saw, anyone with simple carpentry skills can create a beautiful window or door cornice in just a few hours.
 
Read on and we’ll show you how to select the materials, assemble the parts and attach the cornice to the wall. We’ll also share design tips to help you match a cornice style to your home’s décor. Search online for cornice suppliers and you’ll see that you can save huge money by building your own.

Design the cornice to fit your home
Design elements within your home should dictate the wood type, molding style and finish that you select. Depending on the design, the top either overlaps the sides, sometimes with a routed edge, or is nailed to the top or inside of the box and doesn’t show from below. The tops are best made from 1x4s, 1x6s or 1x8s. There’s no need to cut the tops to width if you choose the right combination of top style and board size. The example we show is a 1x6 nailed on top of the box, which gives an overall inside depth of 4-3/4 in. For the same look but with a shallower box, you could also nail a 1x4 inside the box flush with the top for a depth of 3-1/2 in. Choose whichever method it takes to clear your curtains.
 
Other Cornice Design Options
Cornice design options are almost endless. If you’re having trouble choosing, here’ s a tip. Buy short lengths of different types of trim along with some cheap 1x4s and 1x6s. Cut everything to 1-ft. lengths and mock up several different combinations. Just squirt a little wood glue on the pieces and clamp them together for about 10 minutes. Hold the mock-ups over the opening to get a feel for the final look.
 
Select materials and collect key tools
If you plan to paint your cornices, poplar and aspen are good choices for the box materials. They’re stable and relatively cheap, and the grain won’t show through paint. Pine and basswood moldings are usually the least expensive choices for paintable trim.

If you want a stained or natural wood cornice, look for oak, mahogany, cherry, maple and others at home centers. The biggest problem is finding hardwood moldings other than oak. You may have to special-order them or find a specialty millwork supplier by looking under “Millwork” in the Yellow Pages or online.
 
The best tool for cutting miters on wide boards (1x6s) is either a 10-in. compound miter saw or a sliding compound saw. Standard compound saws work like typical miter saws, but the motor and blade tip sideways, making them capable of cutting bevels. A sliding compound miter saw cuts compound angles too, but the motor and blade slide on tracks so it can handle wider stock.
 
Be sure to use a sharp finish-cutting blade in either one. Prices for standard compound miter saws are quite low, or you can rent one.
 
You can predrill and hand-nail most of the project, but an air-powered brad nailer with 1 and1-1/2-in. brads makes the job much easier. Many are inexpensive and well worth the price. Or you can rent one. (Rent one of the special airless ones and you’ll save the price of renting a compressor.) But for the money, compound miter saws and brad nailers are far too useful and far too fun not to own yourself.
 
Assemble the basic box
Every cornice begins the same way, with cutting and assembling the three-sided, lidded box. Then you add the trim of your choice and finish the cornice. The cornice is then ready for mounting on the wall by screwing it to a 1x2 that’s screwed to the wall above the opening.

Begin by measuring the curtain and curtain rod for length, depth and width. Measure with the curtains open so you take into account their thickness when bunched. Add an inch or so to the depth and the width of the curtain rod to make sure the cornice will cover everything.

Miter the ends and front box pieces first. It’ s easiest to square up the board, then tilt the miter saw to cut a 45-degree bevel for the first end piece and then square it up to cut the second end. The mitered corners are glued and nailed together with 1-in. brads. Measure the assembly to determine the exact length for the top.

Apply the trim
When mitering the trim for the box, always start by first cutting and mounting an end trim piece, then the long front trim and finally the other end. That way, you’ll be able to check fits and get crisp miters at each corner. Fit each miter, then scribe the length of each piece rather than measuring. It’s faster and much more accurate. It’s best to cut pieces just a tad long so you can shave them down until they fit perfectly. If you’ re new to woodworking, it’ s nice to have a helper by your side to hold the miters together while you’re scribing lengths or fastening parts.

The trick to cutting perfect crown molding miters is to rest the molding upside down and against the bed and fence while cutting the 45-degree angles. If you cut wide crown molding, you may have to extend the fence height by screwing a length of 1x4 to the miter saw fence through the holes in the back. Remember that the long point of the miter is always the top edge. That’ll help you remember which way to angle the saw before cutting. To further eliminate the costly mistake of miscutting, an angle, draw a light line while you’re fitting the piece to indicate the proper angle.

Smooth and finish the cornice
Fill nail holes and prime before painting. If your cornices have elaborate details like dentil blocking, you’ll get better results with several light coats of spray paint instead of brushing. Finish highly detailed natural and stained wood with spray lacquer, shellac or polyurethane.

Prepaint the 1x2 cornice ledger to match the wall before you put it up if you think it’ll show after the window covering is in place.
 
Mount the cornice over the window
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

  • Miter saw
  • Air Powered Brad Nail Gun
  • Cordless drill override and 1/8-in. bit.
  • Tape measure
  • Screw gun
  • File
  • Safety glasses
  • Paintbrush

 

Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here's a list.

  • 2-1/2-in. wood screws
  • Wood filler
  • Paint or stain
  • Glue
  • Sand paper (fine)

 
Decorating Ideas
Decorative Trim
Home Decorating
 
 
Photo Credit: The Family Handyman

Newsletter Signup
  • Connect
  • Pinterest

Terms of Service | Privacy Policy Corporate Site | Advertise With Us | About Our Ads

Copyright © 2014 Homesessive | All Rights Reserved | Part of AOL-HuffPost Home